Republic Manatrol Hydraulic Valves

Republic Manatrol Control Valves

click on image for data sheet

Accessories

Series 910 hand pumps are double-acting providing primary, backup or emergency hydraulic power.

Series 910N hand pumps are double-acting with needle valve providing primary, backup or emergency hydraulic power. Series 910N incorporates a cartridge needle valve that provides an easy method of bleeding an actuator or system back to tank.

910R Series

Series 910R hand pumps are double-acting with relief valve providing primary, backup or emergency hydraulic power. Series 910R incorporates a cartridge relief that provides a smooth, quick unloading of the pump should the system become overloaded.

913 Series

Series 913 hand pumps are single-acting providing primary, backup, or emergency hydraulic power. The hand pumps can be utilized anywhere; at any time, that hydraulic power is required, since the hand pump does not require an electrical or mechanical power source.

914 Series

Series 914 hand pumps are double-acting providing primary, backup, or emergency hydraulic power. The hand pumps can be utilized anywhere; at any time, that hydraulic power is required, since the hand pump does not require an electrical or mechanical power source.

915 Series

Series 915 & 916 hand pumps are double-acting providing primary, backup, or emergency hydraulic power. The hand pumps can be utilized anywhere; at any time, that hydraulic power is required, since the hand pump does not require an electrical or mechanical power source.

CE Removal Tool

No data sheet

GTS Gage Isolator

Series GTS gage isolator valves have a push-to-read knob that delivers instant pressure to the gage, yet totally isolates the gage from the fluid line until the knob is pressed.

MFB Flow Control

Series MFB flow control valves are designed for applications where it is necessary to supply flow from a single pump to two separate circuits (Snow plow attachment and a dump body).

419 Series

Series 419 shuttle valves allow for the selection of a hydraulic circuit when there is more than one control source in the hydraulic circuit. read more...

440 Series

Series 440 and 450 high pressure check valves permit free flow in one direction, and shut off in the reverse direction with an extremely low internal leakage. These valves are ruggedly built for systems with high shock and high velocity, and will close smoothly.

480 Series

Series 480 free flow check valves permit free flow in one direction, and shut off in the reverse direction. Series 480 check valves can handle high velocity and will provide low pressure drop and zero leakage.

580 Series

Series 580 and 593 swing check valves permit free flow in one direction, and shut off in the reverse direction with an extremely low internal leakage. Series 580 and 593 check valves will provide low pressure drop.

AVF Hydraulic Series

Series AVF adjustable velocity fuses are designed to provide automatic hydraulic line rupture shut-off, as well as the ability to isolate a problem circuit on parallel circuit applications.

AVF Pneumatic Series

Series AVF (Pneumatic) adjustable velocity fuses are designed to provide automatic air line shut-off if a line should rupture or break. The use of fuses limits the possibility of personal injury or damage to equipment from whipping hoses. The fuses are field adjustable for easy setup and operation. A set screw in the body allows the selected setting to be locked.

CLS Series

Series CLS inline check valves are designed to provide free flow in one direction and a positive check in the opposite direction. They are available with a variety of port types and sizes and may be mounted in any position.

CP Series

Series CP check valves permit free flow in one direction; flow in the opposite direction is blocked until pilot pressure unseats the poppet and permits flow in the opposite direction.

CS Series

Series CS check valves permit free flow in one direction, and total shut-off automatically in the reverse direction. Poppet checks, not ball checks, are standard on all Series CS check valves. Poppets eliminate chatter and minimize wear.

ECR Series

Series ECR adjustable check valves have an adjustable knob that allows the cracking pressure to be selected and locked at that rate by a jam nut. These valves allow flow in one direction and prevent flow in the opposite direction.

ICP Series

Series ICP pilot-operated check valves allow free flow in one direction, and prevent any flow in the opposite direction until the pilot is actuated, allowing the valve to open and permit flow in the reverse direction.

J416A & J417A Series

Series J416 and J417 mini-check valves permit free flow in one direction and near zero leakage in the reverse direction. Series J416 and J417 check valves are used in applications with restricted weight and space constraints.

LT & LTF Series

Series LT and LTF check valves will operate satisfactorily when installed in any position. These valves may be used as line check valves, permitting full flow of hydraulic oil in one direction only or they may be used as restrictors.

VLS Series

Series VLS velocity check valves protect your hydraulic system in the event of line rupture. These valves return to the open position once the pressure is equalized. Series VLS valve is a flow sensing, hydraulic check. Flow will pass through the check until the designated closing flow is reached. Then the check will close, stopping further flow.

Check Valves

Exectrol Directional Control Valves

961, 962 & 965 Series

Series 961, 962, 963, and 965 valves serve as dump valves or shut-off valves depending upon the configuration ordered. These valves fit the need for fast remote opening and closing and can be found in fast remote unloading circuits.

21100 Series

Series 21100 Exectrol directional control valves are direct solenoid operated 4-way control valves. A slide and balanced seals are used which provides near zero leakage. The valves have a high tolerance to media contamination as each movement of the slide wipes the sealing surfaces clean which in turn results in long service life.

21200 Series

Series 21200 Exectrol directional control valves are direct solenoid operated 4-way control valves. A slide and balanced seals are used which provides near zero leakage. The valves have a high tolerance to media contamination as each movement of the slide wipes the sealing surfaces clean which in turn results in long service life.

21353 & 21356 Series

Series 21353 and 21356 Exectrol directional control valves are solenoid operated and can serve as a dump valve or a shut-off valve depending upon the configuration ordered. The valves handle grease and oil interchangeably without modification. The valves have a high tolerance to media contamination.

21400 Series

Series 21400 Exectrol directional control valves are inline mounted, solenoid operated control valves. A slide and balanced seals are used which provides near zero leakage. The valves have a high tolerance to media contamination as each movement of the slide wipes the sealing surfaces clean which in turn results in long service life.

23100, 23200 & 23300 Series

Series 23100, 23200, and 23300 Exectrol directional control valves are pilot operated 4-way control valves. A slide and balanced seals are used which provides near zero leakage. The valves have a high tolerance to media contamination as each movement of the slide wipes the sealing surfaces clean which in turn resultsin long service life.

25100 & 25200 Series

Series 25100 and 25200 Exectrol directional solenoid control valves, pilot operated 4-way control valves. A slide and balanced seals are used which provides near zero leakage. The valves have a high tolerance to media contamination as each movement of the slide wipes the sealing surfaces clean which in turn results in long service life.

Flow Control Valves

Needle Valves

Series 133, 135, 143 and S133, S135, S143 needle valves are capable of metering flow of a wide variety of liquids and gases. A soft seat design can be used when zero leakage is required.

154 Series

Series 154 needle valves meter flow on systems with pressures up to 690 Bar (10,000 PSI).

6611 Series

Series 6611 flow divider or flow combiner valves provide division of flow from a pump into equal parts,normally used to divide flow from one pump to two actuators. The valve serves as a combiner in the reverse direction.

D Series

Series D deceleration valve is a cam operated 2-way valve with tapered spool. As the cam depresses the plunger, flow through the valve is gradually decreased to the cut-off point.

FG3PKC Series

Series FG3PKC pressure and temperature compensated flow control valves regulate flow and may be used for applications requiring meter-in, meter-out and bleed-off.

FS Series

Series FS flow control valves provide precise control of flow and shutoff in one direction, and automatically permit full flow in the opposite direction.

MVI Series

Series MVI cartridge-type needle valves are designed for installation in a precision-machined cavity made in the manifold of the machine. Detailed instructions for machining the required cavity for the valve are given on page D30.

NS Series

Series NS needle valves provide excellent speed control and shutoff for hydraulic applications where a reverse-flow check valve is not required. They also take minimum space for installation, conserving space.

PCMS Series

Series PC*MS pressure compensated flow control valves are designed to regulate flow at a selected rate, then maintain this flow constant within ±5% as inlet and outlet pressures vary. However, changes in fluid temperature will prevent flow from holding constant.

S133 Series

Series 133, 135, 143 and S133, S135, S143 needle valves are capable of metering flow of a wide variety of liquids and gases. A soft seat design can be used when zero leakage is required.

T143 Series

Series T143 and T148 toggle valves can be used on vacuum and gas applications. These toggle valves are used when quick, positive on-off action is required as well as zero leakage.

TPC Series

Series TPC valves are pressure compensated and are insensitive to variations in oil temperature. These valves are ideal for use on meter-in, meter-out or bleed-off circuits.

8000C Series

Series 8000C and 8100C valves are 2 and 4-way manual selector valves with near zero leakage characteristics.

8000E Series

Series 8000E valves are 2, 3 and 4-way manual selector valves with near zero leakage characteristics and are rated to 207 Bar (3000 PSI) for liquids and 138 Bar (2000 PSI) for air.

8100E Series

Series 8100E valves are 2, 3 and 4-way manual selector valves with near zero leakage characteristics and are rated to 414 Bar (6000 PSI) for liquids and 276 Bar (4000 PSI) for air.

8400E Series

Series 8400E valves are 2, 3 and 4 way miniature selector valves with near zero leakage characteristics and are rated to 207 Bar (3000 PSI) for liquids and 138 Bar (2000 PSI) for air.

8500 Series

Series 8500 valves are 2, 3 and 4-way manual selector valves with near zero leakage characteristics and are rated to 207 Bar (3000 PSI).

Lo-Torq Directional Control Valves

Plug Valves

744 Series

Series 300 and 700 are 2, 3, and 4-way plug valves which can handle a variety of media. Series 300 contains a self-lubricating PTFE plug.

700 Series

Series 300 and 700 are 2, 3, and 4-way plug valves which can handle a variety of media. Series 300 contains a self-lubricating PTFE plug.

300 Series

Series 744 4-way plug valves can handle a variety of media. The valve design requires low actuation torque and has a very low pressure drop.

Pressure Control Valves

620-649 Series

Series 620 - 649 in-line pressure control valves open the system to tank when the system pressure reaches the pressure setting of the control valve.

665 Series

Series 665 relief valves are adjustable, in-line direct acting relief valves. The valve opens when the system pressure exceeds the pressure at which the valve is set.

P6701 Series

Series P6701 valves serve as a remote pilot for a pilot operated parent valve.

PR400S Series

Series PR*S pressure reducing valves maintain an independently controlled constant outlet pressure on one leg of the hydraulic system, regardless of pressure at the valve inlet or on the main relief valve.

PR6701 Series

Series PR6701 pressure reducing pressure control valves maintain an independently controlled constant outlet pressure on one leg of the hydraulic system, regardless of pressure at the valve inlet or on the main relief valve.

R6701 Series

Series R6701 relief valves are pilot operated relief valves. When system pressure reaches the selected adjustable setting on this valve, the valve opens the system to tank.

RA Series

Series RA and RAS direct operated relief valves are often used for pop-off protection against over pressure on systems where normal over pressures are relieved by other relief valves such as Series RP and RM types.

RCP Series

Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure by opening to tank when pressure reaches the selected relief pressure.

RP Series

Series RP pressure control valves open the system to tank when the system pressure reaches the pressure setting of the control valve

MacroMotion Fluid Power

Fluid Power | Pneumatics | Hydraulics | Motion Control

Fluid Power Experts Specializing in Parker Hydraulics, Numatics and Hose & Fittings, Ontario Canada