Fluid Power | Pneumatics | Hydraulics | Motion Control

Series CE, CP and C 2-way slip-in cartridge valves are hydraulically controlled seat valves that are designed for compact block installation. Slip-in cartridge, cover, and pilot system are valve elements that permit single and combined functions.

Pilot Valve with Preload Function DSB*P*Subplate Mounting NG6

Adapter Plate

Series RE*E*W proportional pressure relief valves consist of a proportional pilot stage and a slip-in cartridge main stage. A mechanical maximum pressure stage is optionally available. For sizes NG25 and NG32 a screw-in cartridge is used; for sizes NG40, NG50 and NG63 an additional sandwich unit is used.

Series R pressure relief valves consist of a manual adjusted pilot stage and a cartridge main stage. Series RS*E consists of a manual adjusted pilot stage with a directional valve for an electrically controlled vent function and a cartridge main part.

Pilot Valve with Proportional Relief

Pilot Valve with Pressure Relief

Pilot Valve with Pressure Sequence

Check Valve

Hydraulically pilot operated check valves allow free flow from A to B. The counter-flow direction is blocked. When pressure is applied to control port X, the ring chamber flow from B to A is released. The pilot control ratio is 6:1.

Series TDL 2/2 way, proportional throttle valves are used in applications where high flow has to be precisely controlled with a very fast response time. Typical applications are die casting, injection molding and hydraulic presses.

Series TDP 2/2 way, proportional throttle valves are used in applications where high flow has to be precisely controlled at maximum dynamics. Typical applications are die casting, injection molding and hydraulic presses.

Series TPQ 3/2 way, proportional throttle valves are used in applications where high flow has to be precisely controlled at maximum dynamics. Typical applications are die casting, injection molding and hydraulic presses.

Series UR*E unloading valves consist of a mechanical pilot stage and a slip-in cartridge main stage. These valves are used to unload a circuit at low pressure. The mechanically adjustable pressure signal to unload the main stage has to be applied to port X. The pressure differential between opening and closing is 15%.

Shuttle Valves

Sandwich Valve with Pressure Relief